You can use this to punch hole dies for snaps, rivets, and eyelets on things like leather, rubber, vinly, paper, cardboard, belts, curtains, tarps, shoes, hats, bags, and clothes. It gives the best performance for single-layer products with a thickness of 1-9 mm.
It's made from steel, so it's super strong and will last a long time, even if you use it a lot. Easy to use, so you can quickly put metal eyelets on belts, shoes, and other stuff without any hassle. Suitable for everyone – pros, beginners, and people who just enjoy crafting.
You'll need a press machine to use this, it doesn't come with one. Also, the dies won't work on their own without a grommet press.
1,5 mm (≈1/17 inch = 0.059”) : Used for general purpose punching of 1.5 mm diameter holes.
2,5 mm (≈3/32 inch 0.098”) : Used for punching holes for 15 mm and 12,5 mm snap buttons.
3,5 mm (≈9/64 inch = 0.138"): Used for punching holes for 1.7 no eyelet-grommet
4,5 mm (≈11/64 inch = 0.177") : Used for punching holes for 2 no eyelet-grommet
5 mm (≈13/64 inch = 0.197") : Used for punching holes for 3 no eyelet-grommet
6 mm (≈15/64 inch = 0.236") : Used for punching holes for 4 no eyelet-grommet
7 mm (≈9/32 inch = 0.276") : Used for punching holes for 5 no eyelet-grommet
10 mm (≈25/64 inch =0.394") : Used for punching holes for 24 no eyelet-grommet
For really stretchy stuff: The hole you make should be about 3 to 4 millimeters smaller than the inside of the eyelet.
For stuff that stretches a little: Make the hole about 0.5 to 1 millimeter smaller than the eyelet's inside.
For stuff that doesn't stretch at all: The hole should be the exact same size as the inside of the eyelet.
Die specifications: Dies top screw thread size of 6.3 mm (1/4 inch), bottom die slot diameter size of 11.9 mm (1/2 inch) and are compatible with our hand press machine. If you have a different hand press, please check your hand press measurements to ensure they match the requirements of your machine.
